

Borosilicate Glass:
Prints sticking to your glass print bed? Struggle to get your printed parts off the glass plate without breaking them? Then you need a new glass bed. This is a consumable part, but the good news is replacement glass is relatively inexpensive.
4mm thick Borosilicate glass build plates are perfect for 3D printing because, they are rated at a much higher temperature than normal glass and won't crack from the heating cooling cycles of a 3D Printer.
We recommend replacing your glass bed whenever it becomes scratched or marked to ensure that your prints have an even surface to stick to; scratches and marks are commonly the result of using tools to remove printed parts. A top tip for minimizing the need to use tools to remove your prints is to first spray 3D lac on the bed for adhesion, then after the print is finished let the print and glass cool fully first. Once the glass is cool you should be able to pop your prints off with ease and without the need for any tools.
GLASS SIZE GUIDE:
PRINTER MODEL
|
GLASS SIZE
|
Flashforge Creator Pro / Dreamer & Wanhao Duplicator 4s
|
235mm x 155mm
|
Wanhao i3 V2.1 / Plus
|
200mm x 215mm
|
Omega i3 & Wanhao Duplicator 6
|
220mm x 220mm
|
Raise3D N1 | 255mm x 236mm |
Creality3D CR-10 Mini
|
306mm x 235mm |
Creality3D 3S | 310mm x 310mm |
Raise3D N2 / N2 Plus
|
330mm x 340mm |
Creality3D 4S
|
410mm x 410mm
|
Creality3D 5S
|
510mm x 510mm
|
Payment & Security
Deine Zahlung wird sicher bearbeitet. Wir speichern keine persönlichen Daten.